Float Switches
Triton Controls manufacture and distribute a variety of float switch level sensors. Float switches are inexpensive, efficient level detectors, simple to install, and designed for trouble free operation over a long period. Each type has a three core cable with open and closed contact arrangements which change depending on the angle of the sensor. The float switches are available in 5, 10 or 20m cable lengths with an actuating weight fitted.
LR20Non-mercury Level RegulatorA new design the LR20 is a more cost effective alternative to the LR02. The float chamber is moulded polypropylene Download Data Sheet lr20_data_sheet.pdf Contact us about this product |
 |
LR123 Phase Pump Level Control Unit1) Interfaces with all Triton float switches. 2) Weatherproof plastic enclosure to IP67. 3) Input power: 230V AC, 150mA fuse. Download Data Sheet lr12lft.pdf Contact us about this product |
No image available |
LR11Level Control Unit1) Interfaces with all TRITON Float Switches 2) Weatherproof plastic enclosure to IP 3) Power: 230V AC, 150mA fuse Download Data Sheet lr11lft.pdf Contact us about this product |
No image available |
LR10High Level Alarm1) Interfaces with all TRITON Float Switches 2) Weatherproof plastic enclosure to IP 3) Power: 230V AC, 1A fuse Download Data Sheet High-Level-Leaflet.pdf Contact us about this product |
 |
LR09Non-mercury Level Regulator Lr09A new design miniature float switch using a ball and microswitch arrangement for level sensing. The float chamber is moulded polypropylene. Download Data Sheet lr09-pg1&pg2.pdf Contact us about this product |
 |
LR08/LRW8Non-mercury Level Regulator Lr08/lrw8A new design float switch using a microswitch and ball arrangement for level sensing. The float chamber is moulded polypropylene. The LR08 can be supplied with an optional stabilizing weight The LRW8 has the counter weight inside the chamber Download Data Sheet lr08-pg1&pg2.pdf Contact us about this product |
 |
LR07Non Mercury Level Regulator Lr07A new design for use in potable water. The LR07 is a plastic float switch moulded to a EPDM 3 core cable. Download Data Sheet lr07w-pg1&pg2-flagnew2008.pdf Contact us about this product |
 |
LR06Non-mercury Level Regulator Lr06A new design for use in diesel oil. The LR06 is a plastic float switch moulded to a PUR polyurethane 3 core cable. Download Data Sheet lr06.pdf Contact us about this product |
 |
LR03 ATEXNon-mercury Atex Level Regulator Lr03The LR03-IS is a variant of the LR03 series, contains a special low voltage / low current microswitch that is compatible with the voltage and current requirements of intrinsically safe systems Download Data Sheet LR03atex-Pg1&2-Flag.pdf Contact us about this product |
 |
LR03Non-mercury Level Regulator Lr03A new design using a microswitch and ball arrangement for level sensing. The float chamber is moulded in polypropylene with and optional weight and there's a choice of cable, between low-cost PVC for water based applications or synthetic rubber where higher chemical resistance is required. Download Data Sheet lr03-pg1&pg2.pdf Contact us about this product |
 |
LR02IS ATEXNon-mercury Atex Level Regulator Lr02The LR02-IS is a variant of the LR-02 series, contains a special low voltage/low current microswitch that is compatible with the voltage and current requirements of intrinsically safe systems. Download Data Sheet LR02-IS-Pg1&2.pdf Contact us about this product |
 |
LR02Non-mercury Level Regulator Lr02A variation of the LR01 with a microswitch designed for eco-friendly applications which are sensitive to mercury. A rolling ball arrangement replaces the mercury switch and all components are sheathed in synthetic rubber for high chemical resistance. Download Data Sheet lr02-pg1&pg2.pdf Contact us about this product |
 |
